The rib of beef in reverse sear on the kamado is cooked in two stages: first gently at 120 °C until it reaches 48 °C at the core (45 to 60 minutes), then seared for 1 to 2 minutes on each side at 300 °C. After 5 minutes of resting, it reaches 52 °C: a uniformly pink meat from edge to edge, without a grey layer, under a dark and caramelised crust. Both stages are done in the same kamado.
IN BRIEF
- Temperature: 120 °C, then 300 °C
- Cooking method: Indirect, then direct
- Cooking time: About 1 hour
- Rest: 5 minutes
- Core temperature: 48 °C at the end of gentle cooking, 52 °C after resting (rare)
- Level: Medium
- For: 2 to 3 people
INGREDIENTS (FOR 2 TO 3 PEOPLE)
- 1 rib of beef weighing 1.2 kg (approximately 5 cm thick)
- 1 tbsp of coarse salt
- Black pepper from the mill
- Fleur de sel for serving
- Optional: 30 g of butter, 2 cloves of garlic and 3 sprigs of thyme
EQUIPMENT
- A COEO kamado QUATRO M or QUATRO L
- A deflector (ceramic stone or Split & Mix half-moons)
- A temperature probe
- Wood charcoal pieces
- Heat-resistant gloves
- To light the charcoal without chemicals: the BOOSTER electric lighter, first embers in 10 to 20 seconds
- On the QUATRO L, for nice grill marks: the HMQL2 enameled cast iron half-grill or the reversible cast iron half-plancha, ribbed side up
STEP-BY-STEP PREPARATION
- Prepare the meat. Take the rib out of the refrigerator 1 hour before cooking. Salt it with coarse salt on all sides. For an even better result, salt it the day before and leave it uncovered in the refrigerator on a rack.
- Start the kamado at 120 °C. Light the charcoal, install the deflector and the grill, then stabilise the kamado at 120 °C by almost completely closing the bottom and top vents.
- Cook gently until the core reaches 48 °C. Place the rib in the centre of the grill and insert the probe into the thickest part, without touching the bone. Close the lid. Allow 45 to 60 minutes to reach an internal temperature of 48 °C.
- Raise the kamado to 300 °C. Remove the rib and cover it with a sheet of aluminium foil. Using gloves, remove the deflector, then open the vents wide. The kamado will reach 300 °C in about ten minutes.
- Sear for 1 to 2 minutes per side. Sear the rib for 1 to 2 minutes per side over direct heat, lid open. On a well-heated cast iron grill, rotate it a quarter turn halfway through searing to achieve crosshatch marks. For a more indulgent version, baste it at the end of searing with melted butter infused with garlic and thyme.
- Let rest and slice. Let it rest for 5 minutes: the internal temperature will rise to about 52 °C, which is rare. Remove the bone, slice into thick pieces, and add fleur de sel and pepper.
TEMPERATURE GUIDELINES
| Desired doneness | Remove from low cooking at | Temperature after resting |
|---|---|---|
| Rare | 44 °C | 48 °C |
| Medium rare | 48 °C | 52 °C |
| Medium | 53 °C | 57 °C |
The COEO tip: While the kamado heats from 120 to 300 °C, keep the meat covered with a sheet of aluminium foil. It won't cool down in 10 minutes.
REVERSE SEAR, CLASSIC SEAR OR DIRECT COOKING ON THE COALS: WHICH TO CHOOSE?
| Method | How | Result | For whom |
|---|---|---|---|
| Reverse sear (recommended) | 120 °C indirect until 48 °C at the core, then 1 to 2 min per side at 300 °C | Uniform pink from edge to edge, caramelised crust | Thick ribs, for risk-free cooking |
| Searing then gentle cooking | Searing at 300 °C, then deflector in place at 150 °C until 48 °C at the core | Marked crust, slight gradient of cooking | Those who love the classic method |
| Direct cooking on the coals (‘caveman’) | Rib placed directly on the coals, without a grill, turned every 2 minutes until 48 °C at the core | Very dark crust, intense fire flavour | Thrill seekers |
ON THE QUATRO L: THE REVERSE SEAR IN TWO ZONES WITH THE SPLIT & MIX
With the Split & Mix system of the QUATRO L, you can do the entire reverse sear without ever removing a hot deflector. Install a half-deflector on one side to create an indirect cooking zone, and the half enameled cast iron grill HMQL2 (or the reversible griddle, ribbed side) on the other side, above the coals.
1. Cook the rib on the deflector side, kamado stabilised at 120 °C, until 48 °C at the core.
2. Cover the meat with a sheet of aluminium foil, open the vents wide and let the cast iron heat up to 300 °C.
3. Slide the rib onto the cast iron and sear it for 1 to 2 minutes per side, rotating it a quarter turn halfway through searing for crosshatch marks.
The enameled cast iron retains a lot of heat: it marks the meat more distinctly than a stainless steel grill and maintains its temperature when you place a cold piece on it. The half-plancha also allows you to cook side dishes on its smooth side while the meat rests: potatoes, mushrooms, asparagus.
VARIANT: RIB OF BEEF DIRECTLY ON THE EMBERS (CAVEMAN METHOD)
For an even more intense smoky flavour, the rib can cook placed directly on the embers, without a grill or deflector. The kamado is well suited for this: its ceramic firebox concentrates a very hot and even layer of embers.
1. Use only lump charcoal, never briquettes: they contain binders. Open the vents and wait for the embers to be bright red, without flames.
2. With a bellows or by tapping, blow away the ash on the surface, then place the salted rib directly on the embers.
3. Turn it every 2 minutes with long tongs, placing it each time on a fresh area of embers. For a 5 cm rib, count about 12 to 15 minutes in total: rely on the probe and remove it at 48 °C at the core for rare cooking.
4. Tap it to remove any stuck embers, let it rest for 5 minutes, then pepper and slice.
Safety: wear heat-resistant gloves and use long tongs. Keep your face at a distance when opening the lid: the influx of air can suddenly revive the flames.
FREQUENTLY ASKED QUESTIONS
What is reverse sear cooking?
The reverse sear reverses the classic cooking method: the meat is first cooked slowly at low temperature, then it is seared at very high temperature. This results in an even cook from edge to edge and a nicely caramelised crust.
How long to cook a rib of beef on the kamado?
Allow about 1 hour for a 1.2 kg rib: 45 to 60 minutes at 120 °C until it reaches 48 °C at the core, then 1 to 2 minutes of searing per side at 300 °C, and 5 minutes resting.
What core temperature for a rare rib of beef?
Take it out of the slow cooking at 48 °C. After searing and 5 minutes resting, it reaches about 52 °C: this is a rare cook.
What thickness to choose for a rib of beef on the kamado?
Choose a rib that is at least 4 to 5 cm thick. Thinner, it cooks too quickly to benefit from the slow cooking.
Can you cook a rib of beef directly on the coals of the kamado?
Yes, this is the "caveman" method. Use lump charcoal, turn the rib every 2 minutes and take it out at 48 °C at the core for a rare cook, which is about 12 to 15 minutes for a 5 cm rib.
Can you cook a rib of beef on the kamado QUATRO M?
Yes. The 35 cm grill of the QUATRO M accommodates a 1.2 kg rib of beef. The QUATRO L, with its 47 cm, allows you to cook two at the same time.
How to get grill marks on a rib of beef?
Sear it on a well-heated cast iron grill at 300 °C, and rotate it a quarter turn halfway through searing on each side. On the QUATRO L, the half enameled cast iron grill HMQL2 or the striped side of the reversible plancha gives very clear marks.
EVEN MORE RECIPES ON THE KAMADO
Retrouvez nos 10 meilleures recettes au kamado et le guide des températures, et découvrez nos kamados QUATRO M et QUATRO L.
THE BEST KAMADO ACCESSORIES
Discover a range of cooking grills, kamado accessories and cooking utensils.